15
2-1) SET-UP NUMBER OF SUB KEY
- If use it for MAIN KEYBOARD, set-up number of allowed SUB KEYBOARD.
- Available to allow for number of SUB KEYBOARD up-to 14.
2-2) SELECT TO NUMBER OF USING SUB-KEYBOARD
- If use it for SUB KEYBOARD, select to the number of using SUB KEYBOARD.
- Available to select the number of SUB KEYBOARD from 1 to 14.
3) SUB COMM TYPE
- It works by SCOM1=9600bps / SCOM2=38400bps / SCOM3=115200bps for SUB Interface Set-up.
If the Signal Speed is faster, the Reaction Velocity would be faster. But recommend you to set the
lower Signal Speed for long distance transmission or poor transmission situation.
- In case of SCOM1, available to set maximum 8 number of SUB-Keyboard and can connect with
maximum 8pcs of SUB-Keyboard.
4) ALARM TYPE
- ARU(Alarm Receiver Unit): With ARU connected, Alarm signal can be received..
- CAMERA: The camera receives Alarm signal by itself.
5) VIDEO MODE : NTSC/PAL
- Select the Signal type between NTSC and PAL video signals.
- If Video Output is something wrong, please check Video Signal (NSTC or PAL) mode with
Keyboard’s Video Mode. They should be same Video Signal.
③ Press F/F button : After Save the set-up data and then move to Top Menu
Press F/N button : Escape set-up menu and then move to previous menu screen
④ After finish to set-up, press “SET” button. Then move out to “Control Mode” screen.
♦ At First, set-up number of Sub-Keyboards on Main-Keyboard, and then select to exact
Number of Sub-Keyboard which was connect from no.1 to next step by step.
It could be happened an error if the number of Sub-Keyboard is empty Keyboard or select
wrong number of Keyboard.
♦ ex).
1) SELECT MAIN/SUB : MAIN KEY ----------Æ The user wants to use it as Main Keyboard.
2) SELECT SUB KEY Q,ty : 05 ----------Æ It will allow max. 5 Sub keyboards.
3) SUB COMM TYPE : SCOM_MODE3
4) ALARM TYPE : ARU ----------Æ and Alarm signal will be received on ARU.
5) VIDEO MODE : NTSC ----------Æ Video type on Video mode is NTSC.
To Next Page
Loading...