dacell DN-30W - Function List

22
4) Fuction mode list
Name
Function
Setting
출고시 설정값
F-00
Decimal point 0, 1, 2, 3 1
Pulse/circle (DI-30W) 0 ~ 360 60
F-01
Division 1, 2, 5, 10, 20, 50 1
F-02
Display filter 0.01, 0.02, 0.05, 0.10, 0.20, 0.50, 1.00 0.20
F-03
Hold mode Sample, Peak, Absolute, A/D 1 (Peak)
F-04
BCD Busy time 0.050, 0.100, 0.200, 0.500, 1.000 0.100
F-10
Auto zero tracking 0 ~ 99 0
F-11
Auto zero tracking time 0.0 ~ 5.0 sec 0.0
F-12
Auto zero at start 0, 1 0
F-13
Base offset -19999 ~ 99999 0
F-20
Comparison mode Decision, High limit, Low limit, Low&High 0 (Decision)
F-21
Hysteresis 0 ~ 99 0
F-30
DAC mode
b_05v, b_10v, b_02A, b_42A
U_05v, U_10v, U_02A, U_42A
b_10v
F-31
DAC capacity 0 ~ 99999 30000
F-32
DAC speed 0, 1 0
F-33
Zero adjustment -999 ~ 999 000
F-34
Span adjustment -999 ~ 999 000
F-40
ID Number 000 ~ 255 000
F-41
Baud rate 2.40, 4.80, 9.60, 19.20, 38.40, 57.60, Print 9.60
F-42
Protocol 0, 1 0
F-50
Display reverse mode 0, 1, 2 0
F-51
Unit of force Kg(kg/㎠), N, ℓb, bar, MPa 0 (Kg)
F-52
Key disabling Zero key, Lo key, Hi key, Hold key 0000