Dacor EF48 - After the Install, the Finishing Touches

Page 1-19
seCTion 1 - ProduCT familiarizaTion
After the Install, the Finishing Touches
As stated previously, the exterior of the Dacor Built-in Refrigerators is completely
customizable.
The stainless steel version of the refrigerator comes ready for use. The exterior is
suited for use in any kitchen with the space.
Panels can be manufactured for installation on the doors and sides of both the panel
and the overlay version. The panel version comes with full-length extruded handles.
The overlay version comes without a handle, allowing the customer to have any type of
handle manufactured to match their décor.
From glossy acrylic to rich mahogany, the exterior can be designed to either place the
system in the limelight or camouflage this workhorse to blend into its surroundings.
Instructions for the creation of the panels and the necessary dimensions are included
with the refrigeration system.
17.28"
20.92"
69.12"
34.00"
26.05"
82.79"
2.40"
2.50"
24.00"
8.80"
46.41"
Upper Frz.
Door Panel
Lower Frz.
Door Panel
Fresh Food
Door Panel
Side Panel
Machine Compartment Panel