Dacor EF48 - Page 23

daCor builT-in refrigeraTor serviCe manual
Page 1-20
After the Install, the Finishing Touches (continued)
If the owner wants to replace the
black panels on either side of the ice
and water dispenser, the freezer door
would need to be disassembled to
slide in the left trim panel.
The equipment compartment panel is
slid in from the end.
It is very important that any trim
panel is only designed to fit within
the frame provided. Airflow for the
heat exchange must be able to flow
around the panel.
•
•
•
daCor builT-in refrigeraTor serviCe manual
The door panels are slid in from
the handle side of the door.
•