(1) Lowering Speed Control Lever
(A) High speed (B) Low Speed
6. The lowering speed of the lower
link is proportional to the applied
weight but can be controlled by
adjusting the draining passage of
the hydraulic uid. (See “Lowering
speed control valve of lifting arm
lower link” on Page 4-36.)
H11O530a
If trying to lift an object with
e x c e s s i v e w e i g h t b y t h e
3-point hitch while the trac-
tor is not equipped with prop-
er front suit case weights,
the front wheels may be lift-
ed instead, leading to roll over.
Make sure to follow the speci-
cations for use.
(1) Position Control Lever
(2) Lock Bolt
H11O580a
7. The lower limit of the implement’s
lowering height can be set by lim-
iting the movement of the lever by
the lock bolt.
WARNING