DAELIM VS125 User Manual

15
If you press this button, starter motor
runs and engine is started.
If horn button is pressed when main
switch is in “ON” position, horn is
sounded
This switch is used to let other operators
know your intention of passing other
v e h i c l e s .
Use winker switch when you turn to
left or right
<HOW TO USE>
If this switch is turned on when the main
switch is in “ON” status,winker is brinking.
To release winker operation, return winker
switch to its original position.
R .... Turn to right
L .... Turn to left
<HOW TO USE>
Press passing light switch
S TA R T E R 󰼿 BU TT ON HORN BUTTON
WINKER SWITCH
ST AR T ER 󰼿
B󰼿U󰼿T󰼿T󰼿O󰼿N
PASSING󰼿LIGHT󰼿SWITCH
H O R N 󰼿 B U TT O N
● Do not press starter button repeatedly
because it consumes great amount of
power causing battery to be exhausted
sooner.
● If the headlight is placed on high-
beam, this switch will not operate.
PAS S I N G 󰼿L I G HT󰼿S W I T C H
W I N K E R 󰼿 SW I TC H
영문-메뉴얼작업󰼿󰼿2005.12.29󰼿5:4󰼿PM󰼿󰼿페이지15

DAELIM VS125 Specifications

General

Displacement	124.6 cc
Cooling System	Air-Cooled
Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Ignition	CDI
Starting System	Electric & Kick