DAELIM VS125 User Manual

FUSE REPLACEMENT
FUSE󰼿H O LDE R
<DISASSEMBLY> <ASSEMBLY>
FUSE󰼿 C ON N ECT O R
C󰼿O󰼿R󰼿D
●Never use a fuse with a different
rating from that specified. Serious
damage to the electrical system or a
fire may result, causing a dangerous
loss of lights or engine power.
●Turn the ignition switch OFF before
checki ng or replacing fuse to
prevent accidental short-circuiting.
●When disassemble fuse, make sure
that fuse holder isn’t separated.
●After assembling fuse in the part of
connector, check if fuse moves
easily to a line. If fuse moves easily,
it may cause an accident at heating.
●When replacing any of the electrical
parts (lights and gauges), be sure to
replace them with the recommended
parts. Using different parts can lead
to the fuses burning out or damage
to the battery.
●When washing the motorcycle take
special card not to allow to be
splashed in the area of the fuse.
Turn off main switch and check fuse for
sign of cut.
●Remove the four flange bolts, and take
off the right lower cover.
●Fuse is installed inside fuse holder
located near battery.
●To separate fuse, open fuse holder,
hold both ends of fuse cord and pull up,
and pull out the fuse connector
crosswise.
●If the newly replaced fuse is burned
again soon , it is an indication of
trouble.
39
영문-메뉴얼작업󰼿󰼿2005.12.29󰼿5:15󰼿PM󰼿󰼿페이지39

DAELIM VS125 Specifications

General

Displacement	124.6 cc
Cooling System	Air-Cooled
Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Ignition	CDI
Starting System	Electric & Kick