4–16 CLIMATE CONTROL AND AUDIO SYSTEM
Adjusting the volume
The system volume can be adjusted in
steps from 0 (off) to 41 (maximum).
To increase the system volume,
½ turn the knob/pushbutton (1) in a
clockwise direction.
To decrease the system volume,
½ turn the knob/pushbutton (1) in an
anticlockwise direction.
Setting the power-on volume:
You can set the volume that you want
the unit to play at when it is switched
on.
½ Press the MENU button (12).
½ Keep pressing the B or Y button (9)
until "ON VOL" appears in the dis-
play.
½ Set the power-on volume using the <<
or >> button (9).
To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.
If you change the setting to "0", the
power-on volume will be the same as
the volume level that you heard before
the unit was last switched off.
NOTE
To protect your hearing, the power-
on volume is limited to a value of
"30". If the volume level was higher
when the unit was switched off and
the power-on volume is set to "0",
the unit will switch on again with a
volume level of "30".
When you have finished making your
changes,
½ press the MENU button (12) twice.
Instantaneously reducing the volume
(mute)
You can instantaneously reduce the vol-
ume (mute) to a level preset by you.
½ Briefly press button (1).
"MUTE" appears in the display.
Setting The Mute Level:
You can set the unit's volume mute
level.
½ Press the MENU button (12).
½ Keep pressing the B or Y button (9)
until "MUTE LVL" appears in the
display.
½ Set the mute level using the << or >>
button (9).
When you have finished making your
changes,
½ press the MENU button (12) twice.
To Next Page
Loading...
