INSTRUMENTS AND CONTROLS 2–19
S3W2311A
WINDSHIELD WASHER
vv
vv
v CAUTION
• Less than clear vision for the driver
can lead to an accident resulting in
personal injury and damage to
your vehicle or other property.
• Do not spray washer fluid on the
windshield in freezing weather.
• Warm the windshield before you
operate the windshield washer.
Washer fluid can form ice on a fro-
zen windshield and obstruct your vi-
sion.
To operate the windshield wipers, turn
the ignition ON and move the wind-
shield wiper / washer lever upward.
The windshield wipers operate in the
following four positions:
• OFF: System off. Default position.
• INT: Intermittent operation. Lever up
one level
• LO: Continuous wipe, slow speed.
Lever up two levels.
• HI: Continuous wipe, fast speed. Le-
ver up three levels.
Misting function
To operate the windshield wipers once
in case of light rain or mist, lightly
move the windshield wiper / washer le-
ver toward the INT position and release
it.
The lever will return automatically to
its normal position when released.
The wipers will operate through one
cycle.
NOTE
Wiper blade will wear out and not
wipe properly reducing forward vi-
sion.
• Replace worn wiper blades.
To Next Page
Loading...
