EasyManua.ls Logo

Daewoo Kalos - Page 174

Daewoo Kalos
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4–66 CLIMATE CONTROL AND AUDIO SYSTEM
X-BASS
The X-BASS feature can be used to
boost the bass at low volume levels.
RADIO MODE
This unit is equipped with an RDS ra-
dio receiver. Many of the receivable FM
stations transmit a signal that not only
carries the programme but also addi-
tional informa tion such as the station
name and programme type (PTY). The
station name appears in the display as
soon as it is received.
Switching to radio mode
If you are in CD or CD changer mode,
½ press the BND•TS button (12)
or
½ keep pressing the SRC button (6) until
the unit switches to radio mode.
“RADIO” appears in the display.
Convenient RDS functions (AF, REG)
The convenient RDS functions AF (Al-
ternative Frequency) and REG (Re-
gional) extend your radio’s range of
functions.
• AF: If this RDS function is activated,
the unit automatically tunes into the
best receivable frequency for the sta-
tion that is currently set.
• REG: At certain times, some radio
stations divide their programme into
regional programmes providing dif-
ferent regional content. You can use
the REG function to prevent the car
radio from switching to alternative
frequencies that are transmitting dif-
ferent programme content.
NOTE
You can adjust the X-BASS settings
separately for each audio source (ra-
dio, CD, CD changer and AUX).
The X-BASS boost can be set in steps
ranging from 1 to 3.
“X-BASS OFF” means that the X-BASS
feature is switched off.
½ Press the X-BASS button (8).
½ Keep pressing one of the
G / H
or V /
T
buttons (5) until the required set-
ting appears in the display.
If you set the X-BASS boost to a value
of 1, 2 or 3, the X-BASS indicator ap-
pears in the display.
When you have finished making your
changes,
½ press the X-BASS button (8).
NOTE
REG must be separately activated/de-
activated in the menu.
Switching REG ON/OFF:
½ Press the MENU button (7).
½ Keep pressing the V or T
button (5)
until “REG” appears in the display.
“OFF” or “ON” is displayed along-
side
“REG”
½ To switch REG on/off, press the
G or H button (5).
When you have finished making your
changes,
½ press the MENU button (7).

Table of Contents