4–70 CLIMATE CONTROL AND AUDIO SYSTEM
Selecting a Programme Type and Start-
ing Seek Tuning:
½ Press the
G or H
button (5).
The current programme type appears in
the display.
½ If you want to select another
programme type, you can do so by
pressing the
G or H
button (5) whilst
this display is visible.
Or
½ Press one of the buttons 1 - 6 (10) to
select a programme type that is stored
on one of these buttons.
The selected programme type is dis-
played briefly.
½ Press the V or T
button (5) to start
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
NOTE
If no station is found that corre-
sponds to the selected programme
type, you will hear a beep and “NO
PTY” appears briefly in the display.
The radio will then retune to the sta-
tion that you listened to last.
NOTE
If the tuned radio station or another
station on the broadcasting network
broadcasts the required programme
type at a later point in time, the ra-
dio automatically switches from the
currently tuned station or from CD /
CD changer mode to the station
whose programme type matches the
type you selected.
Switching PTY ON/OFF
½ Press the MENU button (7).
½ Keep pressing the V or T
button (5)
until “PTY ON” or “PTY OFF” ap-
pears in the display.
½ Press the
G or H
button (5) to switch
between the setting.
When you have finished making your
changes,
½ press the MENU button (7).