CLIMATE CONTROL AND AUDIO SYSTEM 4–77
Pausing playback (PAUSE)
½ Press button 3 0(10).
“PAUSE” appears in the display.
Cancelling Pause:
½ Press button 3 0(10) whilst in pause
mode.
Playback is resumed.
Changing the display
You can switch between the track num-
ber / CD number display and the track
number / playing time display.
½ Press the MENU button (7).
EXTERNAL AUDIO SOURCES
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3
player.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from
a Blaupunkt dealer.
Switching the AUX input ON/OFF
½ Press the MENU button (7).
½ Keep pressing the V or T
button (5)
until “AUX OFF” or “AUX ON” ap-
pears in the display.
½ Press the
G or H
button (5) to switch
AUX on/off.
When you have finished making your
changes,
½ press the MENU button (7).
½ Keep pressing the V or T
button (5)
until “CDC DISP” appears in the dis-
play.
½ Press the
G or H
button (5).
The current setting is displayed.
“TIME” indicates the playing time and
track number display. “CD NO” indi-
cates the CD number and track num-
ber display.
½ Press the
G or H
button (5) to select
the required setting.
When you have finished making your
changes,
½ press the MENU button (7) twice.
NOTE
You can set the scantime. For further
details, please read the section en-
titled “Setting the scantime” in the
“Radio mode” chapter.
To Next Page
