Local Configurations 136
Figure 5-103
Configure the settings for the record control parameters. See Table 5-32. Step 2
Displays all the analog channels and the connected digital channels.
You can select a single channel or select All.
Auto: Automatically record according to the record type and
recording time as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected
channel.
Stop: Do not record.
Enable or disable the scheduled snapshot for the corresponding
channels.
Table 5-32
5.9.2 Instant Playback
You can use the instant playback function to play back the previous five minutes to sixty
minutes of the recorded video in any channel. For details about instant playback function, see
"5.2.2.1 Instant Playback."
5.9.3 Main Interface of Video Playback
You can search for and play back the recorded video saved on the Device.
Select Main Menu > VIDEO, the video search interface is displayed. See Figure 5-104.
To Next Page
Loading...
Need help?
General
