Local Configurations 270
5.18.4 Configuring Record
Record type includes auto and manual record. You can configure record type of main stream
and sub stream. See "5.7 Configuring Record Settings".
5.18.5 Configuring Advance Settings
Create HDD group, and save main stream, sub stream and snapshot of designated channels to
the HDD group.
If the interface displays that "Current HDD Mode is Quota Group", click "Change to HDD
Group Mode", and then configure HDD group.
You can enable either HDD Group Mode or Quota Group. The system prompts to reboot
the device each time when you switch the mode.
Select Main Menu > STORAGE > ADVANCE > HDD. Step 1
The HDD interface is displayed. See Figure 5-241.
Figure 5-241
Select group for each HDD, and then click Apply to complete the settings. Step 2
After configuring HDD group, click Main Stream, Sub Stream and Snapshot tabs Step 3
respectively, to configure the saving of main stream, sub stream and snapshot
information of different channels to different HDD groups. See Figure 5-242, Figure
5-243 and Figure 5-244.
To Next Page
Loading...
Need help?
General
