Local Configurations 175
Select the Send Email check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > EMAIL.
Select to enable audio broadcast/voice prompts in response to a user
account alarm event.
Table 5-44
Click Apply to complete the settings. Step 5
5.11 Smart Detection
Smart detection includes SMD, human face and IVS.
The system processes and analyzes video images, abstracts key information from the video,
and activates alarms when it detects that person, vehicle, face or behavior matches the
detection rule.
Not all models support this function.
SMD, face detection function, and IVS function cannot be enabled at the same time.
5.11.1 SMD
The system processes and analyzes video images, effectively detects persons and vehicles in
the video, and activates alarms. Meanwhile, the system carries out structured storage of the
detection result, to search it quickly in the future.
5.11.1.1 Configuring SMD Settings
Set SMD parameters. When the Device detects information, the system activates alarms.
Select Main Menu > SMART DETECTION > PARAMETERS > SMD. Step 1
The SMD interface is displayed. See Figure 5-142.
To Next Page
Loading...
Need help?
General
