Local Configurations 176
Figure 5-142
Select the channel and enable. Step 2
Set parameters. See Figure 5-50. Step 3
Set sensitivity, including high, middle, and low. The higher the
sensitivity is, the bigger alarm probability will be, the bigger false
alarm rate will be. The system selects middle by default.
Select alarm object, including person and vehicle.
Table 5-45
Click Apply to save configuration. Step 4
5.11.1.2 Smart Search
Filter SMD videos that meet criteria and play back the videos.
Select Main Menu > SMART DETECTION > SMART SEARCH > SMD. Step 1
The SMD interface is displayed. See Figure 5-143.
To Next Page
Loading...