Local Configurations 99
5.4.3.4 Configuring AutoScan
On the Expanded PTZ Control Panel, click . Step 1
The PTZ interface is displayed.
Click the Border tab. Step 2
The Border interface is displayed. See Figure 5-63.
Figure 5-63
Click the direction arrows to position the left and right borders. Step 3
5.4.4 Calling PTZ Functions
After you have configured the PTZ settings, you can call the PTZ functions for monitoring from
the Expanded PTZ Control Panel. See Figure 5-64.
Figure 5-64
5.4.4.1 Calling Presets
On the Expanded PTZ Control Panel, in the No. box, enter the value of the preset that Step 1
you want to call.
Click to call the preset. Step 2
Click again to stop calling the preset. Step 3
To Next Page
Loading...
Need help?
General
