22
Table 2-4 Parameters of adding a VTH
Parameter Description
First Name
Information to distinguish each device. Last Name
Nick Name
Room No.
●
VTH number consists of 1–6 numbers, which may include number
and #. It must be consistent with room number configured at the
VTH.
●
When there are main VTH and extensions, to use group call
function, the main VTH number must end with #0, and the
extension VTH number must end with #1, #2 and #3. For example, if
the main VTH is 101#0, extension VTHs must be 101#1, 101#2…
Register Password
Keep it default.
Register Type
Step 4 Click
OK
.
Step 5 Repeat Step2 to Step4 to add other VTHs.
2.3 VTH Configuration
The first-time configuration function is only available for VTHs that have not been initialized. If your
VTH has been initialized and you want to use this function, you need to go to
Settings
>
Project
Settings
>
Factory Reset
to factory reset your VTH first.
2.3.1 Initialization (Quick Configuration)
Procedure
Step 1 Select a region and language.
To Next Page
Loading...