Need help?Do you have a question about the Dahua Technology VTH5421E Series and is the answer not in the manual?
General| Alarm Output | 1 channel |
|---|---|
| Resolution | 1024 x 600 |
| Ethernet | 10 Mbps/100 Mbps auto-negotiation |
| Network Protocol | TCP/IP |
| RS-485 | 1 channel |
| Power | DC 12V |
| Installation | Wall-mounted |
| Operating Temperature | -10°C to +55°C |
| Audio | Built-in microphone and speaker |
| Camera | 2MP |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Display | 7-inch touch screen |
| Operating Humidity | 10% to 90% (non-condensing) |
Explains hazard signal words (Danger, Warning, Caution, Note) for user safety awareness.
Guides through the configuration process for the VTO unit.
Guides on the initial configuration steps for the VTH device.
Provides instructions on how to monitor VTO devices.
Guides on setting a network password for DMSS app integration.
Details network configuration steps, including LAN settings.
Guides on configuring VTH specific parameters like room number and credentials.
Steps to add and configure VTO devices within the project settings.
Instructions for restoring the device to its factory default settings.
Steps to download and install the DSS Agile VDP mobile application.
Guides on creating an account and logging into the DSS Agile VDP app.
Essential security measures for device network protection.
To Next Page