81
3.7.6 Adding Device
Background Information
This module differs in
Villa
and
Apartment
mode. This section takes the
Apartment
mode as an
example. The snapshots are for reference only.
You can add VTHs and VTOs.
Procedure
Step 1 On the main screen, select
Setting
>
Project Setting
>
Add Device
Step 2 Set a password for the VTH you want to add.
Figure 3-55 Set a password an email address for the VTH
Step 3 Set a password and an email address for the VTO.
The password is used to enter project setting.
To Next Page
Loading...