108
●
Password
: Enter the network password of the VTH you configured in "3.6.9.1 Creating
Network Password".
Figure 5-6 Add device
Step 5 Configure the time zone, and then tap
Done
.
You have completed the device adding steps.
5.4 Configuring Arm and Disarm
Make sure that the VTH and VTO are properly connected.
Procedure
Step 1 On the
Home
screen, tap , select the VTH you have just added, and then tap
Device
Details
to go to the function screen.
Step 2 Tap
Disarm
or
Arm
to disarm or arm the VTH.
Figure 5-7 Disarm VTO
Step 3 Select from the arm/disarm mode list, and the arm/disarm configuration would take effect
on the VTH after you completed the setting.
To Next Page
Loading...