Present video is standard definition status. Press this key to switch to high
definition status, and this key turns to . Press again to switch to
standard definition status.
Press this key to start recording. Recording time is displayed at the upper right
corner of the interface. Press it again to stop recording, and save recording file
in APP local file.
Table 3-1
3.3.2 Closed Status of APP
Press [Call Button] on the doorbell.
In case of blue spinning light, mobile phone will receive a call notice, as shown in
Figure 3-14.
Figure 3-14
According to prompt of this notice, enter doorbell monitoring interface, realize
monitoring and voice talking function.
3.4 Monitoring
Press a picture under a serial number in the device list, and open doorbell monitoring interface,
as shown in Figure 3-15. Preview the real-time videos. Please refer to Table 3-2 for details.
To Next Page
Loading...