Dahua DH-VTO9221D User Manual

17
Figure 4-5
2. Click OK to save config.
System pops up prompt interface which means config is successful.
Note:
Telnet server is ON, debugging personnel can view VTH config via
telnet+IP.
Step 6. Click Network to config VTO info.
Warning:
Before config, please make sure VTO is plugged to power and is in the same segment
with VTH.
1. Fill in VTO name, master VTO IP address, set enable status to , see Figure
4-6.

Dahua DH-VTO9221D Specifications

General

Brand	Dahua
Model	DH-VTO9221D
Category	Intercom System
Language	English