User’s Manual
124
Configure the settings for start IP address (the IP address is allocated in sequence), subnet
mask, default gateway, username, and password.
Click OK to save the settings.
5.6.1.6 Exporting IP Address
You can export the added IP address to the USB storage device.
The exported information is saved in .csv file, which includes IP address, port number, channel
number, manufacturer, username, and password.
Insert the USB storage device to the USB port of the Device.
Click Export.
Browse
Configure the save path.
Click OK to save the settings.
A pop-up message indicating "Successfully exported" is displayed.
Click OK.
When exporting IP address, the Backup Encryption checkbox is selected by default. The file
information includes IP address, port, channel number, manufacturer, username, and password.
If you select the Backup Encryption checkbox, the file format is .backup.
If you clear the Backup Encryption checkbox, the file format is .csv. In this case, there might be a
risk of data leakage.
5.6.1.7 Importing IP Address
You can add remote devices by importing IP address information.
To Next Page
Loading...
Need help?
General