User’s Manual
128
5.7.1 Enabling Record Control
Manual recording operation requires the user have the permission to access STORAGE settings.
Check to ensure the HDD installed in the Device has been formatted properly.
To enter the record control page, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual Control > Record Control.
Record mode
Configure the settings for the record control parameters.
Table 5-24 Record control parameters
Parameter Description
Channel
Displays all the analog channels and the connected digital channels. You can
select a single channel or select All.
Main Stream/Sub
Stream
Auto: Automatically record according to the record type and recording
time as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected channel.
Stop: Do not record.
Snapshot Enable or disable the scheduled snapshot for the corresponding channels.
Click Apply.
To Next Page
Loading...
Need help?
General