User’s Manual
148
Local page
Configure the settings for the local alarms.
Table 5-27 Local alarm settings
Parameter Description
Alarm-in Port Select the channel number.
Alarm Name Enter the customized alarm name.
Enable Enable or disable the local alarm function.
Device Type
In the Device Type list, select NO or select NC as the voltage output
type.
Schedule
Click Setting to display setting interface.
Define a period during which the motion detection is active. For details,
see "Setting Motion Detection Period" section in "5.10.4.1 Configuring
Motion Detection Settings".
Anti-Dither
Configure the time period from end of event detection to the stop of
alarm.
To Next Page
Loading...