User’s Manual
290
Add user
Configure the settings for the parameters of adding a user account.
Table 5-56 Parameters of adding user
Parameter Description
Username
Enter a username and password for the account.
Password
Confirm Password Re-enter the password.
Remarks
Optional.
Enter a description of the account.
User MAC Enter user MAC address
Group
Select a group for the account.
The user rights must be within the group permission.
Period
Click Setting to configure the parameters.
Define a period during which the new account can log in to the device.
The new account cannot log in to the device during the time beyond the
set period.
Password Expires in Set the password validity period.
Permission
In the Permission area, select the checkboxes in the System tab,
Playback tab, and Monitor tab.
To manage the user account easily, when defining the user account
authority, it is recommended not to give the authority to the common
user account higher that the advanced user account.
Click OK to complete the settings.
To Next Page
Loading...
Need help?
General