User’s Manual
303
In the table, you can view the information of current HDD, such as device name, HDD type,
status, total space and free space, and serial number of the HDD port.
Disk manager
Configuring the settings for the HDD manager.
HDD type setting: In the Properties list, select Read/Write, Read Only, and then click
Apply to save the settings.
HDD format: Select the HDD that you want to format, click Format, and enable Clear
HDD database in the pop-up message, click OK and enter the password of admin
user in the prompted dialog box, click OK and then following the on-screen
instructions to complete formatting.
Formatting HDD will erase all data on the disk, proceed with caution.
Note
To Next Page
Loading...
Need help?
General