User’s Manual
56
Table 5-3 Basic settings
Parameter Description
Device Name
In the Device Name box, enter the Device name.
Device No.
In the Device No. box, enter a number for the Device.
Language
In the Language list, select a language for the Device system.
Video Standard
In the Video Standard list, select PAL or NTSC according to your actual
situation.
Instant Playback
In the Instant Playback box, enter the time length for playing back the
recoded video.
On the live view control bar, click the instant playback button to play back
the recorded video within the configured time.
Logout Time
In the Logout Time box, enter the standby time for the Device. The Device
automatically logs
out when it is not working for the configured time
period. You need to log in to the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby time for the
Device.
Click Monitor Channel(s) when logout. You can select the channels that
you want to continue monitoring when you logged out.
Navigation Bar
Enable the navigation bar. When you click on the live view screen, the
navigation bar is displayed.
Mouse Pointer
Speed
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the double-clicking speed must be.
5.1.4.3 Configuring Date and Time Settings
You can configure the system time, choose the time zone, set the daylight saving time, and enable the
NTP server.
You can also configure date and time settings by selecting Main Menu > SYSTEM > General > Date
&Time.
After you have configured the general settings, on the General page, click Next.
To Next Page
Loading...
Need help?
General