19
means not enabled.
3.8.2.3 Group Combination
Doors can only be unlocked by a group or groups that consist of more than two users if the Group
Combination is enabled.
Select Access > Unlock Mode > Group Combination.
Group Combination
Tap to create a group.
Add a group
Table 3-4 Group parameter
Parameter Description
User List
Add users to the newly created group.
1. Tap User List.
The User List interface is displayed.
2. Tap , and then enter a user ID.
3. Tap to save the settings.
Unlock Mode
There are three options: Card, PWD and Face.
Valid User
Valid users are the ones that have unlock permission. Doors can be unlocked
only when the number of users to unlock the doors equals the valid user
number.
Valid users cannot exceed the total number of users in a group.
If valid users equal total user numbers in a group, doors can only be
unlocked by all the users in the group.
If valid users are less than the total number of users in a group, doors can
be unlocked by any users whose number equals the valid user number.
To Next Page
Loading...
