Dahua DHI-ASI7213Y-V3-T1P - Safety Management

57
Date Setting
Set parameters.
Table 4-9 Date setting
Parameter Description
Time Zone Select time zone as needed.
System Time
You can set system time manually, or you can click Sync with PC, to
scynchronize access controller time with the computer time.
DST
1. Enable DST.
2. Select Date or Week in Date Setting.
3. Set Starting Time and Ending Time.
NTP Setting
1. Enable NTP Setting.
2. Configure parameters.
 Server: Enter domain name of the NTP server. The access controller
time will be synchronized with the NTP server.
 Port: Enter port number of the NTP server.
 Update Cycle: Set an update cycle, and then access controller time will
be updated accordingly.
3. Click OK.
Safety Management
4.10.1 IP Authority
Select a cyber security mode as needed.