30
USB Import
Select the data type that you want to import.
The prompt Confirm to import is displayed.
Tap OK.
Data in the USB flash drive will be imported into the access controller.
3.11.3 USB Update
USB flash drive can be used to update the system.
Rename the updating file name to "update.bin", and save the "update.bin" file in the root
directory of the USB flash drive.
Make sure that the computer used to log in to the web is in the same LAN with the device.
Select USB > USB Update.
The prompt Confirm to Update is displayed.
Tap OK.
The update starts, and the access controller reboots after the update is finished.
Features
You can do settings about privacies, card number reverse, security module, door sensor type, and
result feedback. For details of the functions mentioned, see Figure 3-18 and Table 3-10.
To Next Page
Loading...
