Dahua DHI-ASI7213Y-V3-T1P - Reboot; Usb; USB Export

28
 After the access controller is restored to the factory settings, IP address will not be changed.
You can select whether to retained user information and logs.
 You can select to restore the access controller to the factory settings with all user information
and device information deleted.
 You can select to restore the access controller to the factory settings with user information and
device information retained.
3.10.9 Reboot
Select Setting > Reboot, tap Reboot, and the access controller will be rebooted.
USB
 Make sure that the USB is inserted before exporting user information and updating. During
exporting or updating, do not pull out the USB or do other operations; otherwise the exporting
or updating will fail.
 You need to import information from one access controller to the USB before using USB to
import information to another access controller.
 USB can also be used to update the program.
3.11.1 USB Export
You can export data from the access controller to the USB after inserting the USB. The data exported
is encrypted and cannot be edited.
Select USB > USB Export.
The USB Export interface is displayed.