55
HTTP Port
Default value is 80. If other value is used as port number, you need to add this
value behind the address when logging in through browsers.
HTTPS Port
Default value is 443.
RTSP Port
Default value is 554.
Click OK to complete the setting.
4.8.3 Register
When connected to external network, the access controller will report its address to the server that is
designated by the user so that clients can get access to the access controller.
Select Network Setting > Auto Register.
The Auto Register interface is displayed.
Select Enable, and enter host IP, port, and sub device ID.
Table 4-8 Auto register description
Parameter Description
Host IP Server IP address or server domain name.
Port Server port used for auto registeration.
Sub Device ID Access controller ID assigned by the server.
Click OK to complete the setting.
4.8.4 P2P
Peer-to-peer computing or networking is a distributed application architecture that partitions tasks
or workloads between peers. Users can download mobile application by scanning QR code, and then
register an account so that more than one access controller can be managed on the mobile app. You
do not need to apply dynamic domain name, do port mapping or do not need transit server.
If you are to use P2P, you must connect the access controller to external network; otherwise the
access controller cannot be used.
To Next Page
Loading...
