31
Features
Table 3-10 Feature description
Parameter Description
Privacy Setting See "3.12.1 Privacy Setting" for details.
Card No. Reverse
If the third party card reader needs to be connected to the access
controller through the wiegand output port, you need to enable the Card
No. Reverse function; otherwise the communication between the access
controller and the third party card reader might fail due to protocol
discrepancy.
Security Module
If the security module is enabled, you need to purchase access
control security module separately. The
separate power supply to provide power.
Once the security module is enabled, the exit button, lock control
and firefighting linkage will be invalid.
Door Sensor Type
There are two options: NO and NC.
Result Feedback Displays whether the unlock succeeded or failed.
To Next Page
Loading...
