51
Face detect
Configure parameters.
Table 4-5 Face detect parameter description
Parameter Description
Threshold
The larger the value is, the higher the accuracy will be.
Max.
Recognition
The larger the angle is, the wider range of the profiles will be recognized.
Anti-fake Threshold
This function prevents people from unlocking by human face images or
face models.
There are two options: Enable and Close.
Fill
Setting
You can set fill light brightness.
Setting
There are three fill light modes.
NO: Fill light is normally on.
NC: Fill light is normally closed.
Auto: Fill light will be automatically on when a motion detection
event is triggered.
When Auto is selected, the fill light will not be on even if Infrared Light
value is greater than 19.
Infrared Light Adjust IR brightnees by dragging the scroll bar.
To Next Page
Loading...
