39
The interface of 1-channel 4K high definition (H.265) series is shown in Figure 4-21. For other
models, see Figure 4-20.
Select the fixed split or enter the split number Step 2
manually (for example, 3×3 represents 9-split).
Only 1-channel 4K high definition (H.265) series supports 64-split.
Click OK. Step 3
System pops up a prompt box.
Prompt box Figure 4-22
Click OK. Step 4
The split blocks are displayed.
After block division, the window is locked by default. Click to unlock the window, if you
need to adjust window position and size.
Block division display Figure 4-23
4.3.4.3.2 Window Split
Window split is to split the selected windows freely. Previous signal remains in the first window after
splitting.
Select a signal window. Step 1
It is suggested that tour window should not be selected for window split.
Select Window Split > Window Split. Step 2
The Window Split interface is displayed.
To Next Page
Loading...