71
4.5.3.1.2 Alarm Output
When an abnormal event occurs, alarm output channel produces alarm signal. Alarm device
connected with alarm output port will execute alarm linkage actions.
Select Setup > Event Management > Alarm Setup > Alarm Output. Step 1
The Alarm Output interface is displayed.
Alarm output Figure 4-67
Select alarm output slot and channel. Step 2
Click Save. Step 3
4.5.3.2 Abnormal
Set alarm linkage actions when an abnormal event occurs. The system executes alarm linkage
actions.
Select Setup > Event Management > Abnormal. Step 1
The Abnormal interface is displayed. Select abnormal type.
Network offline Figure 4-68
IP conflict Figure 4-69
To Next Page
Loading...