84
Click Done. Step 9
The system exits Video Wall Layout Setup interface. The new video wall is displayed in
video wall list.
Adding is completed Figure 4-92
4.5.5.1.2 Modifying Video Wall
Click , and modify video wall information in the pop-up Video Wall Layout Setup interface. See
"4.5.5.1.1 Adding Video Wall".
4.5.5.1.3 Deleting Video Wall
Tick the video wall check box, click Delete or , to delete the selected video wall after
confirmation.
4.5.5.2 Screen Management
You can configure screen parameters, to turn on and turn off the screen.
4.5.5.2.1 Screen Setup
Configure manufacturer, serial port and com address of every output screen, to realize
communications between screen and device. Com address shall be the same with DIP address of
video wall.
Select Setup > Display Management > Screen Management > Screen Setup. Step 1
The Screen Setup interface is displayed.
The interface is different depending on device model. The actual interface shall prevail.
Screen setup Figure 4-93
To Next Page
Loading...