90
Parameter Description
Stream
Enable device netcard pull stream function.
1-channel 4K high definition (H.265) series
function.
Set window width and
height manually
Double click window on the video wall to adjust window coordinate
and size. See"4.3.2.3 Configuring Window Information."
Filtering
The system checks and filters abnormal stream, to prevent green screen.
Neat Switching of Plan
Plan stream will be switched synchronously and neatly, to enhance
visual effect.
Decoding Strategy
Select the check box. Fluency adjustment zone is displayed. You can
drag the slider to adjust window fluency.
You can only adjust fluency of network signal.
Click Save. Step 3
4.5.5.4 Output Name
You can configure output name and control ID of each channel on the board card. Control ID can
correspond to the binding source (such as keyboard), so the binding source can be displayed on the
video wall.
Output name is only used to distinguish channels.
Select output screens through control ID, and you can configure video wall display of keyboard
or other devices.
Select Setup > Display Management > Output Name. Step 1
The Output Name interface is displayed.
Output name (1) Figure 4-100
To Next Page
Loading...