User’s Manual
65
5.1.4.8 Configuring Basic Storage Settings
You can configure the settings for the situations when HDD is full, file length and time length of
recorded video, and the settings if to auto-delete the old files.
You can also configure basic storage settings by selecting
Main Menu > STORAGE > Basic.
After you have configured the encode settings, on the Snapshot interface, click Next.
The Basic interface is displayed.
Basic
Configure the basic storage settings parameters.
Table 5-7 Basic storage settings
Disk Full
Configure the settings for the situation when all the read/write discs are
full, and there are no more free discs.
Select
to stop recording
Select
to
overwrite the recorded video files always from the
earliest time.
The locked recorded video files will not be overwritten.
Create Video Files Configure the time length and file length for each recorded video.
Delete Expired
Files
Configure whether to delete the old files and if yes, in the
list, select
to configure the time length for how long you want
to keep the old files.
5.1.4.9 Configuring Recorded Video Storage Schedule
You can configure the schedule for the recorded video such as channels to record, alarm settings, and
the armed period.
You can also configure recorded video storage settings by selecting
Main Menu > STORAGE >
Schedule > Record.
After you have configured the basic storage settings, on the Basic interface, click Next.
To Next Page
Loading...
Need help?
General