31
Parameter Function
Server Port DDNS server port.
Domain Name Your self-defined domain name.
User The user name you input to log in the server.
Password The password you input to log in the server.
Interval
z
Device sends out alive signal to the server regularly.
z
You can set interval value between the device and DDNS
server here.
NAS
NAS interface is shown as in Figure 3-19. Current series IPC does not support this function right now.
Figure 3-19 NAS
Please refer to the following sheet for detailed information.
Parameter Function
NAS enable
Please select network storage protocol (FTP) and then
enable NAS function.
Server IP Input remote storage server IP address.
Port
Input Remote storage server port number.
User Name
Log in user account.
To Next Page
Loading...
