32
Parameter Function
Password The password you need to log in the server.
Remote Path Remote storage file path.
Save You can click save button after you complete setup for
one channel, or you can complete the whole setups and
then click save button.
Refresh Click this button to get device latest configuration
information.
NTP
The NTP interface is shown as in Figure 3-20.
Here you can realize network time synchronization. Please enable current function and then input
server IP, port number, time zone and time.
Figure 3-20 NTP
Please refer to the following sheet for detail information.
Parameter Function
Enable Enable NTP function or not.
Server IP Server IP address
Port Server port.
To Next Page
Loading...
