Dahua IPC-HFW2100P Series - Encode Setup; System Menu; Video Window Function Option

5
Figure 2-5 Encode setup
Please refer to the following sheet for detailed information.
Parameter Function
Main stream
In normal network width environment, main stream can record
audio/video file and realize network monitor.
You can set the main stream resolution if your device supports.
Sub (Extra)
stream
If network width is not sufficient, you can use sub stream to
realize network monitor.
Protocol
You can select stream media protocol from the dropdown list.
There are three options: TCP/UDP/Multicast
 6\VWHP0HQX
System menu is shown as in Figure 2-6.
Please refer to chapter 2.2 Live, chapter 3 PTZ, chapter 4 Setup, chapter 5 Alarm, chapter 6 Log out
for detailed information.
Figure 2-6 System Menu
 9LGHR:LQGRZ)XQFWLRQ2SWLRQ
The interface is shown as below. See
Figure
2-7.
Figure 2-7 Video Window Function
Please refer to the following sheet for detailed information.
SN Parameter Function
1 Alarm
output
Click it to generate an alarm output.
2 Digital
zoom
Click this button and then left drag the mouse in the zone to
zoom in. Right click mouse system restores original status.
1 2 3 4 5 6