Dahua IPC-HFW2100P Series - Alarm

58
 $ODUP
Click alarm function, you can see an interface is shown as in Figure 5-1.
Here you can set device alarm type and alarm sound setup.
Figure 5-1 Alarm
Please refer to the following sheet for detailed information.
Type Parameter Function
Motion detection System alarms when motion detection alarm
occurs,
Disk full System alarms when disk is full.
HDD
malfunction
System generates an alarm when HDD is
malfunction.
Camera
masking
System alarms when camera is viciously masking.
Alarm
type
External alarm Alarm input device sends out alarm.
Operation Prompt System automatically pops up alarm dialogue box.
Alarm
audio
Audio When alarm occurs, system auto generates alarm
audio. The audio supports customized setup.
Path Here you can specify alarm sound file.