40
Add IPC
Configure the parameters.
Table 4-5 Parameter description
Parameter Description
IPC Select IPC or NVR.
IPC32 Name Name of the IPC/NVR.
IP IP address of the IPC/NVR.
User Name
Web interface login username and password of the IPC/NVR.
Password
Port 554 by default.
Stream Type
Main stream: High definition that needs large amount of bandwidth.
Applicable to local storage.
Extra stream: Relatively smooth image that needs small
bandwidth. Applicable to network with insufficient bandwidth.
Protocol
It includes local protocol and Onvif protocol. Ple
ase select according to the
protocol of the connected device.
Encryption Enable it if the IPC to be added is encrypted.
Channel
If IPC is connected, default setting is 1.
If NVR is connected, set channel number of IPC on NVR.
Tap OK.
4.4.2.2 Modifying IPC
Select Monitor > IPC.
Tap of IPC.
Modify IPC parameters. Please refer to Table 4-5 for details.
Tap OK.
To Next Page
Loading...
Need help?
General
