12
Network
Type
Description
Portable
hotspot
On the main interface, select Settings > Network Setting > Portable Hotspot, and
enable Portable Hotspot, then you can use your device as a hotspot for other
devices.
1. Enter network SSID.
2. Select a security option, and then enter password.
3. Click Save.
Allowlist See "3.7.1.2.2 Configuring Allowlist."
3.7.1.2.1 Configuring Allowlist
Configure IP addresses that are allowed to access the Signage. Only IP addresses in the allowlist can
be used to log in to the web interface. This is to enhance data security.
On the main interface, select Settings > Network Setting > Allowlist.
Click to enable allowlist functions. means enabled.
Add the IP address of target device to your allowlist.
1) Click .
Add allowlist
2) Enter an IP address.
3) Click Confirm.
The IP address that you have added is displayed.
You can repeat 1)–3) to add multiple IP addresses to your allowlist.
3.7.1.3 Registering the Signage to MPS
Connect the Signage to MPS, and then you can release projects through the MPS and play the projects
on the Signage.
Preparation
The Signage and the MPS are connected to the same network. To connect the Signage and the
MPS to the network, see "3.7.1.2.1 Connecting the Signage to Network."
To Next Page
Loading...
Need help?
General
