User's Manual
157
Figure 5-125 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.7 Missing Object Detection
Background Information
The system generates an alarm when there is missing object in the specified zone.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > IVS.
To Next Page
Loading...
