Dahua N82B3P

User's Manual
204
Figure 5-166 Configure entries frequency
Table 5-47 Entries frequency parameters
Parameter
Description
Statistical Cycle
Set the cycle for counting the entries frequency.
Entries Detected
Set the threshold of entries frequency. When the entries
detected reaches or exceeds the threshold, an alarm is triggered.
Alarm Name
The name is Entries Frequency by default. You can change the
name.
Step 4 Click Apply.
5.10 Alarm Settings
5.10.1 Alarm Information
Background Information
You can search for, view and back up the alarm information.
Procedure
Step 1 Select Main Menu > ALARM > Alarm Info.