User's Manual
196
5.9.14.2 Configuring Vehicle Density
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Vehicle Density.
Figure 5-160 Vehicle density
Step 2 Select a channel and then click Add.
Step 3 Select the Enable checkbox and then select a detection type.
Step 4 Click to draw the detection rule.
Step 5 Click under Parameters and then configure the parameters.
Step 6 Click under Trigger to configure alarm schedule and linkage.
Step 7 Click Apply.
5.9.14.3 Report Query
Background Information
You can search for and export statistics on vehicle density.
To Next Page
Loading...
